Programmable Logic Controllers
REGUL RX00
REGUL RX00 series is a line of fast, redundant, smart, and modular PLCs for the use in fault-tolerant and mission critical I&C and distributed systems.

Manufactured by GP Systems GmbH
Programmable
Logic Controllers

REGUL RX00
Extremely Fast

1 ms for bus data exchange
5 ms for task cycle (including redundant applications)
Smart

Inside every I/O module there is a microprocessor; now you can create applications with fast response, assign precisely time stamps, get average values over large selection, create complex emergency algorithms.
Redundant

Two independent internal buses (redundant EtherCAT). And support of any redundancy schemes (100% full backup, power unit or controller backup, mixed). Replacement of the modules is done without stopping the main application.
Competitively priced

We do not charge for the additional modules/options, such as redundancy, exchange protocols, IDE. And you can use any off-the-shelf components for the network communications.
PRODUCT LINE
Every REGUL RX00 has in common:
  • Fast speed with task cycle as low as 1 ms (5 ms in redundant operation)
  • Hot swapping of all controller modules
  • Use of modular sub-racks to flexibly extend the system one module at a time
  • Programming with Epsilon LD execution environment, supporting five standard IEC 61131-3 languages
REGUL R600

Redundancy support
  • Hot-standby CPUs, power units, I/O modules
  • Hot-swapping of all controller modules
  • Several types of controller redundancy (full, redundant power units, redundant CPUs)
  • Redundant high-speed internal data bus
Highlights
  • Improved electromagnetic protection of the controller and enclosure of the modules, protective module form factor
  • On-panel or in-cabinet mounting
  • 6U Eurocard modules in 19" rack mount
  • Screwless fastening for rapid removal and fixation of modules during hot swapping
  • Passive cooling; no mechanical or rotating structural components
  • Extended temperature range: from -40°С to +60°С
  • Power supply units for 24 VDC and 220 VAC modules

straREGUL R500

Redundancy support
  • Hot-standby CPUs, power units, I/O modules
  • Hot-swapping of all controller modules
  • Several types of controller redundancy (full, redundant power units, redundant CPUs)
  • Redundant high-speed internal data bus
Highlights
  • Modules with modern proportions: 40×180×14 mm (W×H×D)
  • Up to 40 modules in a single subrack
  • Quick installation on a 105-mm DIN rail
  • Non-volatile storage: 4 GB for user archives
  • Passive cooling; no mechanical or rotating structural components
  • Convenient detachable terminal block
REGUL R400

  • Combination of human-machine interface and CPU in one module
  • 7" touchscreen display
  • IP66 protection of the front panel
  • Operating temperature range: from -20 to +60°С
    REGUL R200

    • Modules with compact proportions of 12.9×101×109 mm (W×H×D)
    • Up to 70 modules in a single subrack
    • Quick installation on a 35-mm DIN rail
    • Extended temperature range: from -40°С to +60°С
    • Convenient chassis — replace modules without disconnecting cables
    • Possibility of using locking and sealing elements
    • Location coding according to the module type
    • Operation as part of REGUL controller series for redundancy
      REGUL R600
      Redundancy support
      • Hot-backup CPUs, power units, I/O modules
      • Hot-swapping of all controller modules
      • Several types of controller redundancy (full, redundant power units, redundant CPUs)
      • Redundant high-speed internal data bus
      Highlights
      • Improved electromagnetic protection of the controller and enclosure of the modules, protective module form factor
      • On-panel or in-cabinet mounting
      • 6U Eurocard modules in 19" rack mount
      • Screwless fastening for rapid removal and fixation of modules during hot swapping
      • Passive cooling; no mechanical or rotating structural components
      • Extended temperature range: from -40°С to +60°С
      • Power supply units for 24 VDC and 220 VAC modules
      REGUL R500
      Redundancy support
      • Hot-backup CPUs, power units, I/O modules
      • Hot-swapping of all controller modules
      • Several types of controller redundancy (full, redundant power units, redundant CPUs)
      • Redundant high-speed internal data bus
      Highlights
      • Modules with modern proportions: 40×180×14 mm (W×H×D)
      • Up to 40 modules in a single subrack
      • Quick installation on a 105-mm DIN rail
      • Non-volatile storage: 4 GB for user archives
      • Passive cooling; no mechanical or rotating structural components
      • Convenient detachable terminal block
      REGUL R400
      • Combination of human-machine interface and CPU in one module
      • 7" touchscreen display
      • IP66 protection of the front panel
      • Operating temperature range: from -20 to +60°С
      REGUL R200
      • Modules with compact proportions of 12.9×101×109 mm (W×H×D)
      • Up to 70 modules in a single subrack
      • Quick installation on a 35-mm DIN rail
      • Extended temperature range: from -40°С to +60°С
      • Convenient chassis — replace modules without disconnecting cables
      • Possibility of using locking and sealing elements
      • Location coding according to the module type
      • Operation as part of REGUL controller series for redundancy
      APPLICATIONS
      R600
      • Solutions requiring improved equipment reliability (the support of different controller backup schemes and remote input/output stations)
      • Solutions for non-serviced automation sites requiring increased equipment preparedness and simplified service (quick module changes, rigid tamper-proof module form factors, a wide range of operating temperatures)
      • High-precision measurement systems for demanding applications
      • Fault-tolerant process control systems with discontinuous physical processes (redundant control systems)
      • With a minimal program performance cycle, specialized modules for high-speed measurement of physical parameters
      R500
      • Solutions requiring improved equipment reliability (support of different controller backup schemes and remote I/O stations)
      • High-precision measurement systems for demanding applications
      • Fault-tolerant process control systems with discontinuous physical process (redundant control systems with minimal program performance cycle, specialized modules for high-speed measurement of physical parameters)
      • I&C distributed systems
      R200
      • Small- and medium-sized (based on number of signals) I/O systems
      • Compact solutions
      • Remote I/O
      Building mission-critical applications with local or distributed architecture. Complex algorithms, fast, redundant.
      GP Systems GmbH
      Ochshäuser Str. 45 34123 Kassel, Germany
      +49 561 820 933 50

      info@gp-systems.com